Regulation library · Oil & Gas
No single rulebook governs the oilfield. That's the problem.
Oil and gas operations sit at the intersection of OSHA's general industry and construction standards, DOT's hazmat and pipeline rules, and a lattice of state requirements. RegLogic puts the federal pieces in one searchable library.
Key sections at a glance
§1910.119
Process Safety Management
§1910.1200
Hazard Communication
§1910.146
Permit-Required Confined Spaces
§1926.501
Fall Protection (rig-up work)
49 CFR 172
HazMat Transport
49 CFR 192
Gas Pipeline Safety
The regulatory patchwork
There is no comprehensive federal OSHA standard for upstream oil and gas. Drilling and servicing operations are governed by a combination of 29 CFR 1910 general industry standards — hazard communication, PPE, respiratory protection, lockout/tagout, permit-required confined spaces — and 1926 construction standards when crews build access roads, pads, and facilities. Downstream, refineries and gas plants fall squarely under Process Safety Management (§1910.119) with its 14 interlocking elements.
On the transport side, crude, condensate, and produced gas move under DOT jurisdiction: the 49 CFR Hazardous Materials Regulations for trucking and the pipeline safety regulations (49 CFR Parts 190–199) for gathering and transmission lines. A single midstream operator can touch all of these in one workday.
What enforcement looks like
OSHA reaches upstream sites through the General Duty Clause and its emphasis programs targeting oil and gas hazards — struck-by, fires and explosions, falls from masts and elevated platforms, and hydrogen sulfide exposure. Standards like §1910.132 (PPE hazard assessment), §1910.1200 (HazCom for produced fluids and treatment chemicals), and §1926.501 (fall protection during rig-up) appear repeatedly in citations against drilling and servicing contractors.
The practical challenge is that crews and supervisors need to know which rulebook applies to the task at hand. That's a lookup problem — exactly what plain-language search and a unified library are built to solve.
Oil & gas in RegLogic
RegLogic gives HSE teams the 1910, 1926, HazMat, and pipeline libraries in one interface with consistent color-coded formatting. Search once and see the relevant sections across parts; pin the standards your operation lives by; and push notes — which SIMOPS procedure satisfies which requirement — to every crew, on any device, including offline at remote pads.
Read Oil & Gas Regulations — searchable, color-coded, always current — in RegLogic.
Start HereFAQ
Common questions
Is there a dedicated OSHA standard for oil and gas drilling?
No comprehensive federal standard exists for upstream operations. OSHA applies general industry (1910) and construction (1926) standards plus the General Duty Clause, supported by regional and national emphasis programs targeting oilfield hazards.
When does Process Safety Management apply?
§1910.119 applies to processes involving threshold quantities of highly hazardous chemicals — refineries, gas plants, and many midstream facilities. Most conventional upstream drilling operations are exempt, but the line is fact-specific.
Which rules govern moving produced fluids?
Highway movements of crude, condensate, and other regulated materials fall under the 49 CFR Hazardous Materials Regulations; pipeline movements fall under PHMSA's pipeline safety regulations in 49 CFR Parts 190–199.
Get regulation updates that matter
Join safety pros getting enforcement trends, standard changes, and practical compliance guidance. No spam.